Shower Curtain Hook Hangers

Copyright Claim

Shower Curtain Hook Hangers

Boost
48
109
17

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

PLA - 0.2mm layer, 3 walls, 15% gyroid infill
PLA - 0.2mm layer, 3 walls, 15% gyroid infill
Designer
39 min
1 plate
4.8(5)

Open in Bambu Studio
Boost
48
109
17
6
83
42
Released

Description

These little hangers attach to your shower curtain rings/hooks and give you a place to hold your various shower-related items. That includes, but is not limited to: razors, fog-free mirror, wash cloth, loofah, etc.. To install, simply attach them to your shower curtain hooks/rings inside your shower. 

 

They're small, print pretty quickly, and seem to work well for the intended purpose. We've been using them for a few days and haven't had anything fall off yet, even with opening and closing the curtain. I definitely wouldn't put a ton of weight on them (like a shower caddy) or try to do pull-ups on them or anything, but they're holding up fine for small, lightweight, items so far.

 

There are 3 different items included in the model: 

Closed Loop - This one was designed to hold a razor but I'm sure it can hold other stuff too.

Hook - This is good for anything with a loop or hanging hole like a shower scrubber, mirror, foot scrubber, etc.

Hook, Long - I made this one to hold a wash cloth since I didn't think the shorter hook would work. 

 

Thanks for checking them out!

Comment & Rating (17)

(0/5000)

Boosted
great, I ended up turning the model when printing to try to change the direction of the layer lines to make it a little stronger.
The designer has replied
1
Reply
Thanks for checking it out! A couple people have mentioned changing the orientation to improve the strength. So far it's held up fine for us and I can't see it being an issue for what we're hanging (a razor, a mirror, a wash cloth, etc). Did you have a failure? Or do you plan on it holding something heavy?
0
Reply
Boosted
I didn’t have any failures. But in the past, I have had failures with posts and stems. Since I was a small print I was will to test out a new orientation.
0
Reply
Came from reddit. Sent this post to my wife as were rehabing our master bath & adding a clawfoot tub/shower with full wrap curtain. She was worried about a place to keep razors & her loofah. Guess I'm printing! THANK YOU for sharing!
The designer has replied
1
Reply
That's great to hear! I hope they work out for you. Let me know if you have any feedback.
0
Reply
Saw this through their Reddit post. Thought it was genius!
The designer has replied
1
Reply
Thank you!
0
Reply
I've played around with various ideas like this but never quite got it right. Loving the towel hangers. Great job!
The designer has replied
1
Reply
Thanks!
0
Reply
Print Profile
PLA - 0.2mm layer, 3 walls, 15% gyroid infill
0
Reply
Thanks for checking it out. What suggestions do you have for improving the design?
0
Reply
Replying to @chugalug :
not sure…neither length held my towel. good concept though.
0
Reply
Print Profile
PLA - 0.2mm layer, 3 walls, 15% gyroid infill
1
Reply
Thanks for checking it out!
0
Reply
Print Profile
PLA - 0.2mm layer, 3 walls, 15% gyroid infill
1
Reply
Boosted
Print Profile
PLA - 0.2mm layer, 3 walls, 15% gyroid infill
1
Reply
Print Profile
PLA - 0.2mm layer, 3 walls, 15% gyroid infill
1
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.