Sunlu spool drawers by decosablage

decosablage

Tools>Organizers

IP Report

Print Profile(5)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.24mm layer, 2 walls, 15% infill

2 h

2 plates

5.0(54)

All parts for full layer condensed to a single plate.

3.8 h

1 plate

4.9(24)

A1 & A1 mini All parts 0.24mm layer, 2 walls, 15% infill

4.6 h

4 plates

4.9(7)

LED Strip Holder - for Top Mount on Sunlu Spool Storage

2.3 h

1 plate

Click to see more

Open in Bambu Studio

Boost

1153

2273

154

105

1.3 k

607

Released

Description

Content has been automatically translated.

Show original

Clip-on drawers for Sunlu spools, you can stack multiple spools to create a storage tower, 3 drawers required per spool

Comment & Rating (154)

@Bafflel

Like your design, I added a separator so if you have smaller parts

@user_4045421933

Wish I had known how to do that

@Bafflel

Replying to @user_4045421933 :

I revised it in Fusion 360

@mikeL888

Replying to @Bafflel :

Can you post the stl file on here for the small separator..tia

@user_4045421933

I love it, not sure I have a use for it but I had 2 Sunlu spools laying around. It printed fine, fit together well, after I figured out what the extra little pegs were for. I would love it if it had a base that snapped on. Mine doesn’t spin well on my counter without a non slip pad under it. It’s a handy design, great way to use those excess spools, now to decide what to store in it. I was able to print two of the bins on my A1-Mini on one plate in about 2.5 hours.

The designer has replied

@decosablage

Thank you for your feedback, I will model a foot to resolve your issue ;-)

Show original

@decosablage

@user_4045421933 I am testing the print and will publish the model if all is well

Show original

@decosablage

@user_4045421933 The file for the foot is available here ;-) https://makerworld.com/en/models/1087928

Show original

@Oliver0575

Boosted

Print Profile

0.24mm layer, 2 walls, 15% infill

Does exactly what it says on the tin - modified to print an entire layers worth at once.

@Trauti

Could you upload the profile

Show original

@nowa1988

what about for the smaller ones

The designer has replied

@decosablage

What would you like to discuss

Show original

@nerk01

Replying to @decosablage :

Sunlu has mini spools that are of the same design, just smaller dimensions. The depth from outer edge to inner cylinder is 40mm. The height of the drawer would need to fit into 29mm. I would suggest a height of 28 for easy movement.

@decosablage

Replying to @nerk01 :

Given the spool height, I don't believe a drawer is feasible. If you send me a scan of the spool face and precise measurements, I can model the file for your verification.

Show original

@SkUlLhEaRt

Simply perfect Everything assembles very well, this is free to rotate Good job 👍🏼 Practical for using up the ends of spools and for storage The recycling aspect is important to me😜

The designer has replied

Show original

@decosablage

You're welcome :-)

Show original

@Pachamonte

Printed perfect, added a top to make it look more finished.

@Trauti

Print Profile

0.24mm layer, 2 walls, 15% infill

Perfect with a little bit of filing, the pins also fit in

Show original

@user_3410774029

Excellent idea… I’ve adapted the model to include 2, 3, and 4 compartments… and added a base to allow for rotation… thank you 😉

The designer has replied

Show original

@decosablage

I shared a foot model on my profile ;-)

Show original

@Mikurie

this would be even cooler if there was a texture on the outside that made it look bumpy as if there was filament there. makes it almost like a secret drawer

The designer has replied

@user_1273192920

Better yet, you can attach real leftover filament, making it a truly secret compartment ;)

Show original

@decosablage

https://makerworld.com/fr/models/1079325 il fallait juste le demander :-)

@Mikurie

Replying to @decosablage :

Thanks! That is amazing!

@patrick_reische

Boosted

Thanks a Lot for this Spool Compartment. I Like it a lot. I have made some Adaptions. I use this for all kinds of soldering Stuff, like USB-C Housings, LED´s, switches. 1. I made a "LED Strip holder Adapter" on Top" - to keep Your LED Strips Organized. 2. I made a "Bottom Mount" that the First Spool can rotate freely like all top ones. I uploaded this 2 adaptions on you Profile as additional Print Profil :) BR Patrick

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Rangements pratique pour bobines cartons usagées

Print Profile(5)

Description

Comment & Rating (154)

License

Related Models

Practical storage for used cardboard spools

Drawer organizer furniture

Sunlu spool stand false drawer

Evolving Drawer Furniture