X1 P1 HD PRINTABLE CABLE CHAIN LINKS+PTFE-CLIPS X3 by BMP_LLC

BMP_LLC

3D Printer>3D Printer Parts

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.17mm layer, 3 walls, 100% infill, BMP Light PTFE clips

Designer

59 min

1 plate

5.0(1)

0.18mm layer, 3 walls, 100% infill, Stronger PTFE clip/Links

Designer

1.1 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Finally had the time to design/upload heavy duty cable drag chain links for my cable chain assembly with integrated swiveling PTFE clips on the top of the link. There are 3 links with latches in this file so the exact amount you will need to install in the cable chain to retain your PTFE tube to the print head. Thank you and please rate! Works best if the PTFE tube is slid through the clip rather than pressing it in spreading open the clip just an FYI.

x1 upgrade

x1c cable chain ptfe clips

p1 cable chain ptfe clips

ptfe clips cable chain

heavy duty drag chain links with ptfe clips

Comment & Rating (3)

@ATC_OFFROAD_BMP

Here’s an example of the Links with Integrated PTFE clips installed on my drag chain assembly. The drag chain, swivel link, and links with swiveling PTFE clips are all designed to work hand in hand together so these models are for the 3 links you need to retain your PTFE tube to the printable drag chain assembly just an FYI. The swivel connector is the piece you need to connect the drag chain to the top of the print head. My page for the printable drag chain has more details but feel free to ask questions and please rate! Thank you!