Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PETG JAYO Black Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #14 (1.2mm) swap to Yellow
    At layer #18 (1.52mm) swap to White for the rest.