Suspended Tie Silencer by fay3dlab

fay3dlab

Miniatures>Other Miniatures

IP Report

GIF

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

MULTICOLOR 0.2mm layer, 3 walls, 10% infill

Designer

62.5 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

211

369

412

Released

Description

Here's another star wars ship model for your suspended model collection..

This time i made the Tie Silencer that Kylo Ren piloted in The Last Jedi and The Rise of Skywalker..

As per usual my suspended model has a channel to add in the LED strip lights..
I also prep the print profile to print in multicolor.. using 4 colors..

The suspended Tie Silencer is printed using

BambuLab PLA Grey Sparkle..
BambuLab PLA Basic Black..
BambuLab PLA Basic Silver..
BambuLAb PLA Red

I modelled everything using Autodesk Tinkercad and I might be sharing the speed modelling of the ship itself later..

REMEMBER WHEN PRINTING MY SUSPENDED MODEL TO CHANGE THE WALL GENERATOR SETTINGS FROM CLASSIC TO ARACHNE..
PLEASE PREVIEW THE SLICED MODEL TO MAKE SURE THE STRINGS ARE VISIBLE..

i hope you guys have fun 3d printing my new suspended tie silencer..

Boost Me (for free)

If you'd like the model.. Please support me by boosting and following me on MakerWorld

If you would like to support me, you can join me on my buymeacoffee page..

By joining me as a supporter.. you'll be able to get behind the scenes information

on my current projects as well as future projects..

And if you're looking to sell my prints.. you can join my merchant membership tier as low

as USD10 a month..

Bill of Materials

Maker’s Supply Kits and Parts

WS2812B RGB LED Strip Light (1pcs) - KA001

B-KA001

25.99 USD

× 1

Bambu Filaments

Black

A00-K0-1.75-1000-SPLFREE

19.99 USD

× 1

Silver

A00-D1-1.75-1000-SPLFREE

19.99 USD

× 1

Red

A00-R0-1.75-1000-SPLFREE

19.99 USD

× 1

Slate Gray Sparkle

A08-D5-1.75-1000-SPL

24.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (23)

@SexyMuthaFunka

Fantastic design. Question, if I were to remove the three slightly thicker strings at the very back would I instantly regret it?

The designer has replied

@fay3dlab

it should be fine as i used it as a brimm to print the center ship to stick to the plate better.. The thick strings also help make the suspended ship more rigid and durable.. i actually knocked mine while i was inserting the LED strips and broke 2 of the cannon on the wings.. but the thick strings helped to keep the other strings intact and stablize..

@SexyMuthaFunka

Replying to @fay3dlab :

Thanks for replying. The LED strip arrived today. I had no idea they are individually addressable. Absolutely fantastic now it's lit up!!!

@gee1973

Boosted

Print Profile

MULTICOLOR 0.2mm layer, 3 walls, 10% infill

Fantastic design and print. the end 'prongs' came out a little bit ropey for some reason but it still looks great! Many thanks for your work in designing this!

@lcristeli

dope!

@Eseidl

Print Profile

MULTICOLOR 0.2mm layer, 3 walls, 10% infill

It turned out really awesome ☺️

Show original

@charlie.gummer

Boosted

I have printed many of these but this is my first on the P1S. Amazing job as usual!

@gee1973

Boosted

Can you use a generic LED kit from Amazon?

The designer has replied

@fay3dlab

I think so.. Just make sure the strip width is 10cm or less

@gee1973

Boosted

Replying to @fay3dlab :

10 mm? Thank you, this is printing now, about 1.5 days left! Your models are so good! If you ever have the time or inclination, please do Serenity from the Firefly series like this!

@user_3967998038

Excellent, wonderful! However, even with supports enabled, I see before printing that no supports are generated for the filaments that should hold the model, in my opinion, these would simply be printed in mid-air. Therefore, I am not starting to print it, I fear the filaments/supports would not be printed. Or should I rotate the model?

The designer has replied

Show original

@fay3dlab

you need to change the wall generator settings from classic to arachne

@user_3967998038

Okay, I've done that. I'll get started then :)

Show original

@SoyMurciano

Does this design require no supports

Show original

@Punched

Following along, this is my first floating print, and besides arching it, I suppose supports are still necessary

Show original

@JayLee

Does the profile have the proper wall and support settings to just print this through Handy?

@user_3228921154

Will this also work with PETG HF? Regards Michael

Show original

@charlie.gummer

Boosted

Fantastic work as usual.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Suspended LED Tealight Egg

3D Designs by Lange

317

552

Suspended Star Destroyer

fay3dlab

257

373

Cable Tie Case

RuppiD

cable tie holder

3DItaly

137