This 3D-printed stand is designed to hold up to five Nintendo Switch or Switch Lite consoles in a compact and space-saving arrangement. The sleek and modern design ensures a minimalist aesthetic, making it a perfect addition to any gaming setup.

The stand features:

• Precise slot spacing to securely hold each console while preventing scratches.
• Stable base for firm support without tipping over.
• Easy printability, requiring no supports and minimal filament usage.
• Compact footprint, maximizing space efficiency on desks or shelves.

Designed for convenience and organization, this stand keeps your consoles neatly arranged and easily accessible. Perfect for gamers, collectors, and families with multiple devices!

Please don't hesitate to ask questions. 

I don't have pictures with multiple switches because I designed this for my brother's kids. If you take pictures and wouldn't mind me putting them up, let me know! Thanks!

Update: I added plates with a 3 slot version. Let me know if you would like different quantity of slots and I can upload that for you.

Parts Required:

• 1x USB-A to 6 USB-C cable (Amazon link)
• M3 Screws (Amazon link)
  • 10x M3x12 screws (for clamps)
  • 4x M3x10 screws (for bottom cover) 
• (Optional) 4x rubber feet (Amazon link)

Assembly

Step 1: Assemble the USB-C Cable Clamps

1. Take one clamp cap and slide it onto the middle section using the dove-tail joints. Ensure a snug fit.
2. Insert one of the USB-C cables through the hole in the assembled clamp.
3. Slide the clamp base onto the USB-C cable, pushing it up against the bottom of the middle section.
4. Align the assembled clamp with the pre-drilled holes in the stand’s base and secure it using M3x12 screws (repeat for all five slots).

Step 2: Route the USB-C Cables

1. Guide the cables through the built-in cable guides to keep them organized and prevent them from sticking up too far.
2. Route the USB-A end of the cable through the exit hole in the back of the stand. This hole is intentionally tight—push the USB-A plug through while keeping the cable splitter inside the stand for a clean look.

Step 3: Secure the Bottom Cover

1. Once all cables are routed properly, align the bottom cover with the stand.
2. Secure it in place using M3x10 screws in the designated holes.

Note: The file has recessed that fit the screws better in the bottom cover. I was initially going to put the rubber feet recessed on top of the screw. But in my infinite wisdom (sarcasm), I spaced that the screw head would be where the rubber foot needed to sit.. 

Step 4: (Optional) Install Rubber Feet

1. To prevent slipping, attach rubber feet to the four corners of the stand’s bottom.

Your 5-slot Nintendo Switch charging stand is now fully assembled and ready to use! 🚀