Slab We Have at Home (V1)

Lightweight version available now

This design is intended to fit cards with a penny sleeve  (3.75" x 2.65")

For those cards not cool enough to get graded, but too cool for the bulk box. The design allows a card in a penny sleeve to be displayed and held mostly in place (there is slight tolerance that allows the card to shift if shook).

The Fusion file is parametric and can be adjusted for slightly smaller or larger sleeves under Modify > Change Parameters 

I recommend .02" in addition to the sleeve dimensions to allow it to settle into the base grove. 

Recommendations: 

• Allow the bed to cool before removing to help prevent warping when removing
• When putting the case together set it on a flat surface to help snap together
• When pulling the case apart use a small flat-blade screwdriver from the backside to help poke out the pegs

Coming soon: 

• Stand to display the S.W.H.A.H.

• Possible versions with designs on the back (Currently don't have an AMS)