Metroid Hue Forge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 128.27x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.6mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA Overture White Transmission Distance: 4.4
This print uses 2 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to White 
    At layer #19 swap to black for border