Foldable Phone Stand V2 by Gugalynn

Gugalynn

Household>Office

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

0.2mm layer, 2 walls, 5% infill

Designer

1.6 h

1 plate

4.9(100)

Colored Edges (Minimal Waste) - All Bambu Printers

2.4 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

452

788

115

170

1.1 k

753

Released

Description

V2 for my Foldable Phone Stand, add some features that made it easier to print

The V1 https://makerworld.com/models/864322

What’s New

The wider for the hook, also rise 4mm for charging cables

The enhanced structure was be separated to the side, it also increase the first layer area of the printing, preventing wrapping !

Due to the change of enhance structure, the rotating shaft can be stronger

This is a phone stand that requires no support structures during the printing process. It only takes 60 grams of material and 90 minutes to complete. A specially designed notch allows the phone to charge while being placed on the stand, and it features multiple adjustable angles for self-positioning. If adhesion issues occur during the printing process, please increase the brim settings.

Boost Me (for free)

Your Boost is the best support for me, thank you !

Comment & Rating (115)

@Brabitz

Printed fine. Nice upright design that is ready to use directly after printing. I glued anti-slip feet on. However, the hinges did not survive our 2 year old toddler. Maybe I will try printing with fully filled hinges. In this design, they are hollow.

@Hangover1994

This definitely works to completely fill the hinges Go to Object, then select each individual object, and adjust the infill density and wall thickness For the object with the small hinges, you can use 20% infill density and 3 wall thickness Then the hinges will be printed with solid material

Show original

@Brabitz

update: I stocked up on super glue and fixed the hinges with toothpicks in.

@SilentKei

Print Profile

0.2mm layer, 2 walls, 5% infill

A1 mini Bambu PLA Basic. The print was wonderful, without any problems. No supports or brims needed on textured PEI. Simply superb

Show original

@GreenStar

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

Very quick and easy to print. I used the default settings and Bambu Lab's basic PLA in magenta. I got no issues with the hinges, they are moving very freely. I used a 0.4 mm nozzle for the print.

@NicholasMootoo

Print Profile

0.2mm layer, 2 walls, 5% infill

👌🤙

@ale.marqs

Print Profile

0.2mm layer, 2 walls, 5% infill

Perfeito!

@user_1647972564

Print Profile

Colored Edges (Minimal Waste) - All Bambu Printers

Love it! thx.

@BuildByte3D

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

Exceptional profile, printed without brim and it came out perfectly. Thanks for sharing

@user_2442305363

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

great design, now I use it every day！

@Freitag

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

Excellent, practical, no supports needed the piece comes out ready without assembly, I loved it

Show original

@circuithead

Boosted

Print Profile

0.2mm layer, 2 walls, 5% infill

great print

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (115)

License

Related Models

Print in place foldable phone holder V2

Phone Stand Batman

Headphone Stand tentacle

Gibson Phone Stand