This is an English church Lych gate at a scale of 1:148 for scenic use on an N gauge model railway. I have based it loosely on the one at St Georges Church, Dunster.   This could be uniformally upscaled by 1.95 to make it suitable for a 00 gauge railway.   I printed this on my Bambu Labs X1C using PLA and a 0.2 layer height and a 0.4mm nozzle.  I set the profile to detect thin walls and in the extruder setting changed the refraction from the 0.8mm standard to 2.5mm to help minimise stringing as the nozzle travels between the gaps.  NB. I got a warning that the print needed supports which I ignored and it came out fine.  I used Grey filament and changed to brown at  layer 41 so  you could do that manually  if you do not have an AMS.   Hope you like it.