Ninjago Blade spinner by pyog3d

pyog3d

Toys & Games>Other Toys & Games

IP Report

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

2.8 h

2 plates

4.9(21)

Full set with 34 blades Compatible with A1 Mini

5.4 h

4 plates

5.0(4)

Open in Bambu Studio

Boost

180

351

295

172

Released

Description

In the wave of my first magic spiral creation, and as a respond to requests to make it more deadly I decided to upload this little twist.

This time order of parts don't matter, as all have the same shape and dimensions.

In 3mf file you will find two lengths of the core stick. The shorter one can fit 17 blades, and the second one 34.

During the assembly, please remember to insert the blades with the notch pointing down, and leave a gap of 3-5mm from the last blade to the end cap.

NOTICE

While separating the parts from the build plate, make sure you are not bending them too much, so they are not straight anymore. This may affect spinning capabilities.

below is a link to original spinner.

You can mix blades from both designs as you wany, but only using 100% print profile,

HAVE FUN!

----------------------------------

https://makerworld.com/en/models/984143#profileId-958481

Boost Me (for free)

If you enjoy this design, consider leaving a boost. Thank you!

Comment & Rating (34)

@user_759464906

Boosted

nice

@user_3296789098

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Took a little bit of practice to get it to work. very nice!

@Salindorei

Print Profile

Full set with 34 blades Compatible with A1 Mini

Printed perfectly 😀

@Salindorei

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed perfectly. I used dualcolor silk PLA. So I had to sand the blades just a little as they got stuck on each other. My fiancé stole this one... So I have to print 1 more 🤣🥰

@Spillane3D

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

I love this little Spinny fidget twirly deal!

@BLACKCAT1478

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

super fun fidget

@Lefpazloh

Print Profile

0.2mm layer, 3 walls, 15% infill

@user_1725742700

is there a version for a1 mini?

@lcristeli

Problem solved bro, just posted an A1 mini print profile.

@user_1725742700

Replying to @lcristeli :

@user_1964739861

Do you have a commercial licence for your models?

The designer has replied

@pyog3d

I do. You can purchase my designs with commercial license on Cults3D platform. PM me for more info

@user_3296789098

Boosted

Printed in Silk PLA and it is beautiful. Love! Took some practice to get the flick right ha ha.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.