Crystal Wyvern Dragon Flexi by Cosmo Moore

Cosmo Moore

Toys & Games>Other Toys & Games

IP Report

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

Full Size - 0.16mm layer, 2 walls, 10% infill

Designer

5.4 h

1 plate

5.0(4)

50% Size - 0.16mm layer, 2 walls, 10% infill

Designer

2.1 h

1 plate

4.5(4)

85% Size - 0.16mm layer, 2 walls, 10% infill

Designer

4.2 h

1 plate

75% Size - 0.16mm layer, 2 walls, 10% infill

Designer

3.6 h

1 plate

Open in Bambu Studio

Boost

177

114

Released

Description

A crystal themed wyvern flexi. Prints in place and support free!

I tested various sizes down to 50% and have provided profiles for the the ones I tried out. All sizes fit the A1 Mini.

I used an effects plate to put a holographic finish on the bottom, just be sure to clean your plate well before printing to ensure proper adhesion.

Filaments used are BambuLab PLA Basic Turquoise and Silver, Sunlu Burnt Titanium, and Micro Center Translucent Cool Blue Gradient.

Check out more of my designs in my profile and also below:

Boost Me (for free)

Thanks for looking, happy printing!

Bill of Materials

Bambu Filaments

Turquoise

A00-B5-1.75-1000-SPLFREE

19.99 USD

× 1

Silver

A00-D1-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (14)

@Griffsimons

i printed the file using silk pla. wings broke from body. strength issue with the connection chain on the wings.

@user_1835117806

Yes, let's do it, yes yes

Show original

@user_4102137259

Print Profile

50% Size - 0.16mm layer, 2 walls, 10% infill

great print

@ttdc

Print Profile

50% Size - 0.16mm layer, 2 walls, 10% infill

Strength Issue:while it printed great the wings just broke from joints but this is for the 50% size. Filament is basic PLA and wings were silk.

@cosmomoore

Thank you for the feedback, I'm sorry to hear the wings broke. I hadn't thought to try it with Silk PLA, but I will try printing a copy with it and see if I can figure out a remedy.

@ttdc

Replying to @cosmomoore :

thanks dragon is pretty awesome though

@jamesdeegn

Boosted

Print Profile

Full Size - 0.16mm layer, 2 walls, 10% infill

@cosmomoore

Thank you for the feedback and all the boosts!!

@Lefpazloh

Print Profile

Full Size - 0.16mm layer, 2 walls, 10% infill

@cosmomoore

Thank you for the feedback!

@user_1654267532

Print Profile

Full Size - 0.16mm layer, 2 walls, 10% infill

@user_1654267532

Print Profile

50% Size - 0.16mm layer, 2 walls, 10% infill

@simon1985.st

Print Profile

Full Size - 0.16mm layer, 2 walls, 10% infill

@Adyrv

Print Profile

50% Size - 0.16mm layer, 2 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.