Treasure Map Hueforge Bookmarks by the_bearded_jedi

the_bearded_jedi

Generative 3D Model>Hueforge & Lithophane

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 2 walls, 100% infill

Designer

7.2 h

1 plate

5.0(4)

Open in Bambu Studio

Boost

132

Released

Description

Project: map bookmarks.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 215.15x200mm in size
You may print at higher layer heights below the Min Depth of 0.64mm
The Max Depth is 2.2mm and the Actual Depth is 2mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA PolyLite Pro Yellow Transmission Distance: 11
    PLA PolyLite Cream Transmission Distance: 2
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Yellow
    At layer #15 (1.28mm) swap to Cream
    At layer #16 (1.36mm) swap to White for the rest.

bookmarks

hueforge

map