Smooth Plate QR Code Clip

Smooth Plate QR Code Clip

Boost
15
38
6

Print Profile(1)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Designer
2.3 h
3 plates
5.0(1)

Open in Bambu Studio
Boost
15
38
6
2
14
6
Released

Description

I've had great success with third party plates. The problem is that they do not have the QR code that identifies what type of plate it is. They come with stickers but after a few washes, those start to wear out and loses it's adhesiveness.  

 

I came up with a clip you can slide over the edge of your plate to help identify what type of plate it is. This can then be removed when you wash the plate.

  • There are two clips both are double sided. 
  • One clip has a spot where you can just put the sticker it came with on both sides.  This still lets you remove the clip to wash the plate, and not have the adhesive wear out.
  • Second clip has a spot where you can print the QR code and glue it on.
  • QR code for smooth plate also included.
  • Printed with a .2mm nozzle. You may be able to use a .4mm on the clips but I did not test this. You will need the .2mm for the QR code insert.
  • Brim is recommended.
  • Align the clip edge to the corner of the one side, as shown in the picture. That will work for both sides of the plate.
  • Says “Smooth Plate” to help identify the plate the clip is for. 

Comment & Rating (6)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill
Amazing work. This makes washing the plate easy and keeping the qr codes safe. Highly Recommend printing this in PETG if you're switching plates between a X1C and an A1.
The designer has replied
1
Reply
thanks!
0
Reply
where do you get the stickers?
The designer has replied
0
Reply
They came with the plates I ordered off AliExpress. You can also order them on their own from Ali.
0
Reply
Boosted
Amazing solution to stickers peeling off when washing
1
Reply
Boosted
Amazing Design, this really helps me swapping from X1 to A1
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.