You find the different versions on separate plates in the Bambu Studio Project.
Boost Me (for free)
Version 1: Top and Bottom PinsPrint time: 47 min Because of the pins on the bottom of the pedal there are a lot of overhangs that need support. I recommend to only print this version if you have a special material for the support interface or if you use PETG as a support material for PLA or vice versa. This way you can easily remove the supports and the overhangs look really nice! | ![]() |
Version 2: No Bottom Pins (recommended)Print time: 31 min This version does not have pins on the bottom, which makes printing a lot easier. | ![]() |
Version 3: No PinsPrint time: 30 min If you don't want any pins, this is the version for you 🙂 | ![]() |
Version 4: No Pins, No PinholesPrint time: 22 min For the ones that like it simple. |
![]() |
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)