Retro Headphone Stand inspired by an old radio. 
Add a pinch of good old style to your desk.

There is a small drawer (90x50x25mm) for some tiny objects, like batteries, pendrives, etc. 

It's around 200mm tall in total, but due to split it is also possible to print on A1 mini.

The print is fairy simple but please stick to the settings from that project.
I went through some trail and error iterations to achieve this result.

Especially legs are tricky - tall and thin - I highly recommend SuperTack plate (or CryoGrip).

Legs got additional wall and some extra infill for improving the stiffness.

BambuLab Wood looks amazing in those surfaces.

Printed with PLA and 0.4mm nozzle:

• Legs:
  • 3 walls
  • 20% infill
  • 0.2mm layer height
  • SuperTack plate (or CryoGrip)
  • slowed down
• Body:
  • 2 walls
  • 10% infill
  • 0.2mm layer height
• Drawer:
  • 2 walls
  • 16% infill
  • 0.16mm layer height for better details

Be carefull about the direction of sliding the legs - front should be covered after assembly:

Note: all photos are actual printed model and are copyright protected