Hueforge Butterfly

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA Bambu lab Black  
    PLA Bambu lab Dark Red 
    PLA PolyTerra Sapphire Blue 
    PLA Flashforge  White 
This print uses 4 unique filaments

Swap Instructions:
    Start with  Black 
    At layer #11 (0.96mm) swap to Dark Red
    At layer #14 (1.2mm) swap to Sapphire Blue
    At layer #20 (1.68mm) swap to  White for the rest.