Rose decor by 29FLOMakerWorld: Download Free 3D Models

29FLO

Household>Decor

IP Report

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

A1 [ 0.4mm nozzle ]

Designer

6.7 h

1 plate

4.7(37)

[ 0.4mm nozzle ]

Designer

5.5 h

1 plate

4.7(180)

A1 mini [0.4mm nozzle]

Designer

6.5 h

1 plate

4.6(17)

0.1mm layer, 2 walls, 20% infill

4 h

1 plate

4.9(23)

Click to see more

Open in Bambu Studio

Boost

2551

4226

339

301

5.6 k

2.4 k

Released

Description

Rose Decor.

Feel free to scale it as desired. For sure you can make it bigger. If you choose a smaller size, the model will be more prone to damage. Don’t be tempted by a shorter printing time—take your time to print it properly, and you won’t have to print it twice! :)

If reducing print time is absolutely essential for you, you can simply increase the layer height. Just keep in mind that this will also reduce the level of detail.

Be careful when removing supports. Leafs might be fragile.

Printed with Fuzzy Skin effect.

Read.me:
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament and everything should be fine. Optionally, you can also add a brim to your model for extra stability.

Happy printing!

Membership

If you would like to print and sell my models, you can do so through an active subscription here on MakerWorld or Patreon - https://patreon.com/29flo

Join

Boost Me (for free)

If you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊

Comment & Rating (339)

@BadMaker

I have made 2 attempts and this has pretty much been the results using PLA Support material (white) and PLA Silk (bronze). The print starts out well but ends with the poop chute getting backed up and the print getting stuck. It never errored out but basically paused as pictured below. I also included my slice all view. Keep in mind this is my 4th print overall and the first that did not simply just print.

The designer has replied

@29flo

Use please my settings from 3MF file. You got a lot of mess there. First of all turn off support filament. You dont need it. Change support type to Tree (auto)

(Edited)

@BadMaker

Replying to @29flo :

Will try it again with the standard settings thank you.

@29flo

Replying to @BadMaker :

Use 0.4mm nozzle instead of 0.2mm. It is fine with 0.1mm layer.

@superdaz

Print Profile

[ 0.4mm nozzle ]

came out beautifully,if surprisingly heavy due to 100% infill. printed using eryone rose red and bambu alpine green sparkle with copy master ebony wood for the basr

@JonJonG

Have to be very careful of the stem when removing supports. Printed in PLA transparent, PLA black, and PETG black. All turned out well. Thank you for the model!

@Calmec87

Print Profile

[ 0.4mm nozzle ]

I split this to limit color changes and support usage. worked great! printed in bambu sparkle, emerald green and crimson red

@jamessaunders

Excellent model. Printed on an X1(PLA, 0.4 mm nozzle, .1mm layer height). I separated the rose from the stem and printed in two pieces. This helped reduce support material and improved the quality of the stem. Thanks for the model! It will make for a great valentine's day gift!

@user_715555828

Really lovely, 0.6 nozzle with 0.3 layer slanted at 45 degrees, to get extra strength in the stem and leaves

The designer has replied

@29flo

Oh! 0.6mm nozzle. Thats brutal :)

@user_715555828

Replying to @29flo :

One can still get pretty good detail even with a 6, in fact chances of using a 0.4 or 0.2 are so slim I could just as well sell the spare ones and just keep one of each

@RisingSloth

Boosted

Print Profile

0.1mm layer, 2 walls, 20% infill

excellent print! I would reccomend a tool like pliers or tweezers to remove support as the stem is very delicate

The profile uploader has replied

@An4lAstr0not

that is absolutely beautiful!

@Pharr

Print Profile

[ 0.4mm nozzle ]

I've already printed one up in Black, this is burnt titanium PETG. It's a bit heavy in PLA which is why I decided to print it in a more resilient material. The leaves were a little difficult to save, but the end result is absolutely stunning. Thank you for sharing it

@Pitota

Print Profile

A1 [ 0.4mm nozzle ]

Excellent print, very original, spectacular result

Show original

@jaavi_13

Print Profile

[ 0.4mm nozzle ]

The sheer level of detail in this piece, with its diffuse skin finish, is breathtaking, a truly superb print

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Bouquet of Roses

Golub17

2.6 k

6 k

22.6 k

Rose Bear

Kocyns

2.7 k

4.8 k

21.3 k

Mini roses

DrejkCZ

224

1.1 k

3.8 k

roses with 5 types of stem ( no support )

Anko

1.6 k

4.8 k

11.5 k