Rose decor

Copyright Claim

Rose decor

Boost
1823
2947
186

Print Profile(5)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

[ 0.4mm nozzle ]
[ 0.4mm nozzle ]
Designer
5.5 h
1 plate
4.7(95)

A1 mini [0.4mm nozzle]
A1 mini [0.4mm nozzle]
Designer
6.5 h
1 plate
4.7(9)

A1 [ 0.4mm nozzle ]
A1 [ 0.4mm nozzle ]
Designer
6.7 h
1 plate
4.7(9)

0.1mm layer, 2 walls, 20% infill
0.1mm layer, 2 walls, 20% infill
4.1 h
1 plate
5.0(9)
Click to see more

Open in Bambu Studio
Boost
1823
2947
186
164
3.6 k
1.4 k
Released

Description

Rose Decor

Feel free to scale it as desired. For sure you can make it bigger. If you choose a smaller size, the model will be more prone to damage. Don’t be tempted by a shorter printing time—take your time to print it properly, and you won’t have to print it twice! :)

If reducing print time is absolutely essential for you, you can simply increase the layer height. Just keep in mind that this will also reduce the level of detail.

 

Be careful when removing supports. Leafs might be fragile.

Printed with Fuzzy Skin effect.

 

Read.me:
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament and everything should be fine. Optionally, you can also add a brim to your model for extra stability.


Happy printing!

 

Membership

If you would like to print and sell my models, you can do so through an active subscription here on MakerWorld or Patreon - https://patreon.com/29flo

Join

Boost Me (for free)

If you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊

Comment & Rating (186)

Please fill in your opinion
(0/5000)

I have made 2 attempts and this has pretty much been the results using PLA Support material (white) and PLA Silk (bronze). The print starts out well but ends with the poop chute getting backed up and the print getting stuck. It never errored out but basically paused as pictured below. I also included my slice all view. Keep in mind this is my 4th print overall and the first that did not simply just print.
The designer has replied
0
Reply
Use please my settings from 3MF file. You got a lot of mess there. First of all turn off support filament. You dont need it. Change support type to Tree (auto)
(Edited)
0
Reply
Replying to @dashek :
Will try it again with the standard settings thank you.
0
Reply
Replying to @BadMaker :
Use 0.4mm nozzle instead of 0.2mm. It is fine with 0.1mm layer.
0
Reply
Print Profile
[ 0.4mm nozzle ]
came out beautifully,if surprisingly heavy due to 100% infill. printed using eryone rose red and bambu alpine green sparkle with copy master ebony wood for the basr
2
Reply
Really lovely, 0.6 nozzle with 0.3 layer slanted at 45 degrees, to get extra strength in the stem and leaves
The designer has replied
0
Reply
Oh! 0.6mm nozzle. Thats brutal :)
0
Reply
Replying to @dashek :
One can still get pretty good detail even with a 6, in fact chances of using a 0.4 or 0.2 are so slim I could just as well sell the spare ones and just keep one of each
0
Reply
Have to be very careful of the stem when removing supports. Printed in PLA transparent, PLA black, and PETG black. All turned out well. Thank you for the model!
2
Reply
Print Profile
[ 0.4mm nozzle ]
a beautiful rose I would love to do it white so I can paint it . but when it came to removing the scaffold around it . I had to get my husbands help as it was to attached and to strong .
0
Reply
Print Profile
[ 0.4mm nozzle ]
awesome
0
Reply
I don’t know if this happened to y’all but when i scaled it up it didn’t print the very top few petals
0
Reply
Print Profile
0.1mm layer, 2 walls, 20% infill
these print up well ive fone a few colours on them
0
Reply
Print Profile
[ 0.4mm nozzle ]
turn out pretty good
0
Reply
Print Profile
A1 [ 0.4mm nozzle ]
amazing
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License