The striped swirl lamp by SoDR

SoDR

Household>Decor

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Large shade 0.28mm layer, vase mode

Designer

5 h

1 plate

5.0(12)

Large Base, socketholders, fastner-rings and plug

Designer

3.6 h

1 plate

4.9(11)

Large 0.56mm layerheight, vase mode

Designer

3.6 h

1 plate

5.0(1)

Small Shade A1 Mini compatible

Designer

3.6 h

1 plate

5.0(1)

Click to see more

Open in Bambu Studio

Boost

475

1158

478

156

Released

Description

The striped swirl lamp

1 Feb-25 Now with a smaller, more shelf-friendly version which is also A1 Mini compatible!

Large 20x20x28cm (DxWxH)

Small 16x16x22cm (DxWxH)

Large one is designed for either E14, E27 socketholders with retainingcollars or the LED lamp kit 001

The smaller one is only compatible with a E14 socketholder with retaningcollars.

The socketholders and fastner-rings are not interchangeable between bases

I have uploaded two separate printprofiles for the large shade, one with a printprofile for a 0.8mm nozzle with 0.56mm layer height to get those fat chunky extrutions and one with 0.28mm layer height that is printable with the standard 0.4mm nozzle.

(smokey/gray lapshade is printed with 0.56mm layerheight, the white one with 0.28mm)

The smaller shade is printed with 0.28mm layerheight, also printable with the standard 0.4mm nozzle.

Assembly instructions

Large.

Everyting is included in the plate with the base, just choose which socketholder to use and which fastner-ring that corresponds to the shade you printed and glue them in. Everything is labeled so it shouldn't be any problems.

Small.

Just a few dabs of glue to the fastner-ring and the socketholder and you´re good to go!

¤¤¤ CAUTION! ALWAYS USE LED-LIGHTS!! ¤¤¤

Happy printing!

Comment & Rating (74)

@OldDogNewTricks

Boosted

Print Profile

Large Base, socketholders, fastner-rings and plug

Turned out great with .8 nozzle. I turned the speed to 50% and got a slightly more translucent result. I will be switching for the e14 bulb versus the light kit (shown) for a more even light dispersal.

The designer has replied

@SoDR

Beautiful! ;) Thx for the boost!

@user_4239558401

Boosted

Wow! What an effect! Which filament is that?

Show original

@OldDogNewTricks

Boosted

Bambu transparent PETG Brown (32800). I used .8 nozzle and slowed it to 50%

@PerPlexed

Boosted

Print Profile

Large shade 0.28mm layer, vase mode

Had to scale it a bit down to fit under a sliping roof line. Worked super well and looks great!

The designer has replied

@SoDR

Smart!

@SoDR

Thx for the boost!

@temponi

Boosted

Incredible easy to print. I used Petg blue translucid, layer height 0.4

The designer has replied

@SoDR

cool! LED-puck as lightsource?

@temponi

Boosted

Replying to @SoDR :

I used a teelight just for a test. Ill try a led puck.

@user_1467689340

Boosted

Print Profile

Large shade 0.28mm layer, vase mode

0.4 nozzle, 0.28 layer, looks nice 👍

@jch85

Boosted

Print Profile

Large shade 0.28mm layer, vase mode

Beautiful lamp shade! Modified the base to fit to an Ikea Ingared lamp.

The designer has replied

@SoDR

Looks good! Thx for the boost!

@diesik555

Boosted

Print Profile

Large shade 0.28mm layer, vase mode

What a superb print Printed quickly and reliably All parts fit perfectly Thank you

The designer has replied

Show original

@SoDR

Thank you!

@temponi

Boosted

I scaled it to 80% for printing on the A1 mini

The designer has replied

Show original

@SoDR

I'm working on a 80%, A1 mini compatible version that uses a e14 socket. will be out soon if you are interested

@jag604

Boosted

Any ideas as to why I might be getting these strange ridges?

The designer has replied

@SoDR

Hmmm no sorry. Maybe check on the bambulab forum or reddit if anyone has an idea

@Crisio

Boosted

awesome model, everyone loves it

@mickjay_007

Boosted

what are the differences between 0.28 and 0.55 rings?

The designer has replied

@SoDR

its the layerheight of the lampshades. I have uploaded two versions, one printed with 0.28mm layerheight, and one with 0.56mm layerheight. just choose the one corresponding to the shade you printed. or just test them on the shade before you glue in the ring. Should be a snug fit in all directions

@mickjay_007

Boosted

Replying to @SoDR :

I want to print the small version for a1 mini

@mickjay_007

Boosted

Replying to @mickjay_007 :

but with large legs

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.