Solo Leveling Hueforge

Solo Leveling Hueforge

Boost
14
27
0

Print Profile(1)

All
A1
P1S
P1P
X1 Carbon
X1E
X1

0.08mm layer, 2 walls, 100% infill
0.08mm layer, 2 walls, 100% infill
Designer
7.3 h
1 plate

Open in Bambu Studio
Boost
14
27
0
0
3
1
Released

Description

Boost Me (for free)

Project: Solo Leveling.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

The Model is 235x235mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Transmission Distance: 2.9
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA Bambulab Litho Magenta Transmission Distance: 3.2
    PLA BambuLab Basic Yellow Transmission Distance: 5.5
    PLA BambuLab Basic Orange Transmission Distance: 5.7
This print uses 6 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #11 (0.96mm) swap to Jade White
    At layer #12 (1.04mm) swap to Magenta
    At layer #14 (1.2mm) swap to Yellow
    At layer #17 (1.44mm) swap to Jade White
    At layer #18 (1.52mm) swap to Orange
    At layer #19 (1.6mm) swap to Jade White for the rest.

 

Comment imprimer plus de 4 couleurs avec un seul AMS : à partir de 42 sec sur la vidéo

How to print more than 4 colours with a single AMS : from 42 sec onwards in the video


 

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more