Boost Me (for free)
Wenn euch meine Arbeit gefällt, würde ich mich über euren Support freuen.
Spenden über Kaffee …
Ko-Fi … https://ko-fi.com/lagnor69
PayPal … https://www.paypal.com/donate/?hosted_button_id=7XBNU8XD2XFAE
---------------------------------------------------------------------------------------------------------
Hier findet Ihr die passenden Rahmen dazu
200 × 140 mm & 140 mm × 200 mm || All-in-One-Rahmen
https://makerworld.com/de/models/897636#profileId-856000
200 x 200 mm || All-in-One-Rahmen
https://makerworld.com/de/models/766355#profileId-701658
---------------------------------------------------------------------------------------------------------
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 140x195.97mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA Sunlu Black Transmission Distance: 0.3
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Sunlu White Transmission Distance: 5
PLA eSUN Bone White or Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Steel Grey or Lighter Grey
At layer #16 (1.36mm) swap to White
At layer #17 (1.44mm) swap to Bone White or Beige
At layer #18 (1.52mm) swap to White for the rest.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)