Boost Me (for free)
If you like it.
If you would like to sell my Hueforges a commercial License is available on Patreon. Link is in my bio.
Important:
You may see a floating regions error. This can be ignored.
Printing Instructions
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Remember to select the correct plate type for your printer.
I have used a height range modifier in the object settings for quicker printing. The layer swap numbers in the print profile will not match the ones written below. Do not worry about this.
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Steel Grey Transmission Distance: 1
PLA Sunlu Meta White Transmission Distance: 6.2
Swap Instructions:
Start with Charcoal Black
At layer #14 (1.2mm) swap to Steel Grey
At layer #15 (1.28mm) swap to White for the rest.
Ratings appreciated.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (11)