Lithophane lightbox

Copyright Claim

Lithophane lightbox

Boost
14
31
0

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.28mm layer, 2 walls, 20% infill
0.28mm layer, 2 walls, 20% infill
Designer
4.2 h
1 plate

Open in Bambu Studio
Boost
14
31
0
3
8
5
Released

Description

I wanted a lightbox that was easy to print all the parts on one plate, too many of the ones I found where multiple plates.

 

So I designed this box to fit 3 lithophane panels in, you can even fit 2 complete boxes on one A1 plate.

 

The lithophanes I made on the Litho Maker app they are 100mm x 100mm full settings as per photo included

Which I then printed at 0.12 lay height standing vertically using 10 walls to ensure full thickness.

 

For lighting I use LED strips 2 strips cut to length and stuck to the base and soldered to a USB C adapter which fits perfect into the hole on the backplate.

 

LEDs: Any 6000k COB Led strip will do

USB C plug: https://www.amazon.de/dp/B0CDC1X4BY?ref=ppx_yo2ov_dt_b_fed_asin_title

 

The Pieces will press together and hold by friction, however, there are also 4 holes on the base for M4x10 or M4x12 Socket Cap Head screws that will hold the base to the frame if you want it to be more secure.

Comment & Rating (0)

Please fill in your opinion
(0/5000)

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.