As always THE BEST results are achieved with a 0.2mm nozzle, but a 0.4mm nozzle works well too.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 52.67x199.99mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.5mm
Filaments Used:
PLA BambuLab Basic Red Transmission Distance: 4
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Red
At layer #20 (1.68mm) swap to Black
At layer #25 (2.08mm) swap to White for the rest.
Boost Me (for free)
If you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)