We all love Screwfinity and it's near-perfection, but there was a large demand for greater modularity…

Introducing Wacky Stacky, a new desk organizer storage solution for all of your fasteners that integrates Gridfinity and is stackable. Drawers are held in place and easily slide in/out, now with the ability to lock in place halfway out. Print the optional labels and either write on them with a marker or use the text tool in your slicer.

Print Settings:

• Layer Height: 0.2mm
• Supports on drawers only: Recommended (Supports on front lip ONLY)
• Zombie Tuned print profile: Recommended
• Polymaker Panchroma PLA: Strongly recommended (affiliate)
• Bed Adhesive: Vision Minor Nano Polymer (Code HEDGEHOG at checkout)

File naming convention:

• 6S - Slot units wide
• [2x5] - Two Gridfinity units deep, Five Gridfinity units wide
• [2x] 9S- Two Gridfinity units deep, 9 slots wide
• Medium - Drawer height (Other sizes will be available)
• Gridfinity - Adapter to convert to Gridfinity. Allows different size units to stack.

Instructions:

• Congratulations on your new Wacky Stacky unit! In order to stack, the main Gridfinity unit base size must match for each stack, for example [2x3] stacked on a [2x3], or a [3x6] stacked on a [3x6]. 
• Once you pick the width of your main unit, print out as many bins as you want that will fit. A 6 slot unit will fit one 6 slot bin, or two 3 slot bins, or one 2 slot and one 4 slot bin, etc etc etc. 
• Units of different heights can be stacked as shown in the example pictures, as long as the gridfinity base size is the same. A [2x4] Small unit will snap onto a [2x4] Medium unit and vice versa.
• Use a Gridfinity Top/Bottom to convert the system into a gridfinity compatible stacking unit.
   

Missing the size you need? Leave a comment or contact me on Discord! https://discord.gg/Fa8zUsjfgV