Say goodbye to dirty build plates on your Bambu Lab A1 Mini 3D printer and check that your build area is level.

Are you tired of your prints coming loose during printing because the build plate was not optimally cleaned and level?

Nothing removes dirt from the build plate better than proper cleaning (e.g. soap and warm water) and a full-surface print.

This full-surface print leaves out the exclusion zone and the purge area and otherwise completely covers the print bed.

Recognize areas with insufficient adhesion immediately.
 

Two layers are printed with a 0.4 mm nozzle, but the height of the model can be adjusted using the scale function of Bambu Studio or the slicer of your choice if you want to use a different nozzle or print more layers.

I would recommend printing at least two layers so that the model is thick enough to be easily removed.

How I create my models

I started developing 3D objects myself in 2010, when I got into 3D printing with Prusa Mendel. I still use the software I used back then: OpenSCAD. So if anything should not fit, let me know, adjustments are done with a few variables, because this model was also created from scratch in OpenSCAD.