Dragon carve art for New Year by Cubic Garden

Cubic Garden

Art>Sculptures

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

H2D

0.2mm layer, 2 walls, 10% infill

Designer

10.1 h

2 plates

4.8(19)

0.16mm layer, 2 walls, 10% infill, variable layer height

10.4 h

1 plate

5.0(6)

dragonround4 Chinese characters height fixed and pre-colored.

10.2 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

157

266

640

218

Released

Description

A must-have decor for New Year 2024!

A ‘wreath’ of a hi-detailed dragon in chinese antique decorative pattern, to hang on doors or just to give your living room a nice vibe of culture. It says The Year of Dragon in traditional Chinese caligraphy on the wreath.

龍年裝飾環

A stand is included if you are not hanging it up, please print with support.

A version of english writing and another version of chinese words (means a dragon sending its good fortune and vibe) are added.

Comment & Rating (40)

@tbunce

Really great model. Printed great with four colors. Black, Red, Copper, and tricolor Red-Black-Gold. 24 hours.

@tbunce

I uploaded a print profile with the four colors separated.

@thegoal

Print Profile

0.16mm layer, 2 walls, 10% infill, variable layer height

This is the most beautiful thing I have printed to date! I used the profile just as described, changed the layer height and turned on variable layer height. Only thing I changed in the model was painting the dragon's right eye red to match the left. Turned out amazing!

@great.foto

Not sure if you can read Chinese. The dragonround4 has some problems as those four Chinese characters are not level (not the same height) and can cause printing problems as shown in the pictures. I have uploaded a 3MF with fixed and pre-colored model to address this issue.

(Edited)

The designer has replied

@CubicGarden

You are right! I almost forgot there is another version also uploaded. I will look into it later

@J.lifer

Just Wow.... 9.6 hours with Sunlu Copper Silk. 0.16 height.

@David1987

Print Profile

0.16mm layer, 2 walls, 10% infill, variable layer height

me encanta, esoecta!!

@oscardocko

Boosted

¡Una decoración imprescindible para el Año Nuevo 2024!

@user_3818092186

Copper (PLA silk) + Silk Red (PLA silk) + Black (PLA) + Silver (PLA)

Show original

@Seti

I really like how this one came out. I had some issues with the background strings around the ring as the wood pla didnt play nice to print those. But otherwise it went pretty dam good all things considered. I chose a 4 color print with silk so I had to slow it the eff down.. However, the print stated it was going to take 20 hours to print. So I let it run for 8 hours at 50% speed to get the base and more started then this morning I switched it full speed. Altogether it printed for roughly 13 hours. I chose all silk pla except for the outer ring which is done in Dark Walnut PLA. The others are Jade Green, Red & Black combo, and White silk PLA. I did a bit of post processing mostly of the wood pla. But I think it came out fantastic! The pictures do not do it justice lol... Thank you for the design!

(Edited)