Charizard is one of the most iconic Pokémon, first introduced in the original Pokémon Red and Blue games. As the final evolution of Charmander, Charizard is renowned for its powerful Fire-type attacks and its ability to fly. It has a majestic orange dragon-like body, wings with a blue-green underside, and a tail tip that is always ablaze, symbolizing its vitality and fighting spirit. I hope you like it.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 132.57x176mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Yellow
At layer #20 (1.68mm) swap to White for the rest.
You may like my other Hueforge design, Zapdos
Boost Me (for free)
If you like it, please Boost me :D Thank you!
Comment & Rating (2)