jakewilldoit

cover

IMG_7102.JPG

IMG_7114.JPG

IMG_7117.JPG

IMG_7107.JPG

IMG_7119.JPG

IMG_7104.JPG

IMG_7106.JPG

IMG_7116.JPG

Electronic Hearing Protection/Aid Box

IMG_6684.JPG

IMG_0523.JPG

IMG_0522.JPG

IMG_6692.JPG

IMG_6686.JPG

IMG_6699.JPG

IMG_6688.JPG

IMG_6686_(1).jpg

IMG_0533.JPG

IMG_0531.JPG

IMG_6777.JPG

IMG_6761.JPG

IMG_6773.JPG

Quick Armorer Blocks

IMG_6730.JPG

40mm bottle 1x1x5 Gridfinity

IMG_6748.JPG

IMG_6747.JPG

IMG_6745.JPG

Modular Card Deck Holder

IMG_6733.JPG

38mm Bottle 1x1x5 Gridfinity

IMG_6841.JPG

IMG_6839.JPG

IMG_6826.JPG

IMG_6882.JPG

53mm-54mm Holder 2x2x5 Gridfinity

ASA Smooth 0.2mm layer, 3 walls, 20% infill

ASA FuzzySkin 0.2mm layer, 3 walls, 20% infill

ABS Smooth for Corded 0.18mm layer, 3 walls, 20% infill

PETG - 0.2mm layer, 3 walls, 10% infill, outer brim

Child's music box  wall holder

0.2mm layer, 2 walls, 15% infill

PETG - 0.2mm layer, 2 walls, 15% infill, supports

0.24mm layer, 2 walls, 15% infill

v1 - 0.24mm layer, 2 walls, 15% infill

v2 - 0.2mm layer, 2 walls, 15% infill

2x4 0.2mm layer, 4 walls, 15% infill

smaller for 2x3

I would have liked 2 mounting holes is the only downside

3D_TN

Baseball Cap Hat organizer holder

added a brim sometimes the HF is too much flow. but these are perfect designs. glad to have some alternatives for antique work.

Nonmarring Punch Set

0.2mm layer, 6 walls, 25% infill

I printed in pla for one of them. another I did in ASA with petg latch for a hearing protection box. works great! I used 0.063 silicon gasket and some Eva foam at the top and bottom. For hardware I followed the original making pins from bicycle spokes.