SporkLord

Modular Drawer Spice Rack 

0.2mm layer, 2 walls, 15% infill

When I saw this model I bought a label maker, got a black matte filament, and got to work. My brain is happy every time I cook something, everything fits great and looks neat.
I used glue and washed my plate on each print, only one was about to fall at the very last layer.
Thank you very much for the model !

Asphalt3D

Ringosaurus Ring Holder

0.12mm layer, 2 walls, 15% infill

Had to make a big brother for more scrunchies. This one is 20cm, had to sand his neck a little even with the supports 

Ocular Dynamic

Dragon Door Corner Topper

Darren

NAIL POLISH FINGER SUPPORT

X1 P1 0.2mm layer, 2 walls, 15% infill

squinn

Dragon Egg (Hidden Seam)

Medium - 12.5 cm tall (All Printers)

G-Man Projects

"Blade" Heavy Duty Planetary Gears Fidget Spinner

Blade - Based on BBL 0.16mm High Quality

Billy Hooper

Pot Boy Planter

upside-down:Minimum Support, 70% scaled, 0.2mm layer,2 walls

Thanks for the model that’s a great print.
I reduced the supports a little too much when printing upside down which let marks in the bottom but that’s ok.
I painted it and made it water tight with epoxy resin. I think it’ll make a great birthday gift for my friend :)

Saber3D

Articulated Crystal Dragon by Saber3D

Updated Crystal Dragon (100% Size, 2 Colors, No Brim)

great model, thank you!
i scaled it down 50%, printed perfectly

Small - 9.0 cm tall (All Printers)

great model thank you !
I used sunlu silk pla black/purple

austinvojta

Fidget Cube: Angled

no texture, light (15% infill)

Hey thanks for the model, it's great ! It was supposed to be a gift for a friend but I ended up making one for myself as well. 
Printed with bambulab pla silk copper

mcfazio

Desk Organizer

0.2mm layer, 2 walls, 20% infill

Hey, thanks for the model. I printed this with matte filament.
I had support issues with your settings on the DrawerHolder.stl, I had to stop the print and switch them to Type: Normal (auto) and Style: Snug. These settings also take less time and material. 

E.T.

Airless Ping Pong Ball 3.0

PLA - 0.2mm layer, 3 walls, 15% infill

printed with PETG, did not break after a few toss but doesn’t really bounce even if it was to be expected

porkac

Ring Size Measuring set

GlennovitS 3D

Sliding Pill Box (textured box weekly medication)

ORIGINAL (updated) - DUO - INSERTS - Sliding Pill Box

Zarol_zz

LEGO tissue box

hey, thanks for the model. i printed the bottom part with matte filament, if you do, slow it down or you’ll have stringing and uneven parts, I needed to sand it and prime it again.
also the cap is designed to be on top, making it move everytime I pull a tissue out, having it on the bottom would solve this issue and make it look nicer I believe.

Sakul

Brick Stackable Desk Boxes

NEW 0.2mm layer, 3 walls, 15% infill

Hey, thanks for the model !
I added a negative cylinder part to transform one of the two boxes into a tissue box.
I had an issue fitting the two boxes together though, same scale, different material (pla matte + pla silk). I used an electric drill to sand and make them fit but after an hour I ended up using a hammer, they'll stay together forever and ever now.

3DTut

Self Watering Planter - 5 Inch Grail Style

.16 / 2-Tone / ALL Walls

Hey thanks for the model, I made two of those, used epoxy resin to water tight them ! 

AMT_MW

Life Counter 0-99

Updated 3mf - 0.16mm layer, 2 walls, 25% infill

MiguelCosta

Elite Helmet Hub

printed for a friend who just bought his first motorbike, he liked it, thanks for the model !

iczfirz

Balisong aka butterfly knife fidget NoScrew Needed

Simple. Type 11. Use 1.75 filament to attach handle & blade.

thanks for the model! I used the soldering technique shared by @tweakad in the comments to secure the print 

tweak(c)ad

Kaonashi