ALF77 3D

Panca Per Dummy13

0.2mm layer, 2 walls, 5% infill

Zurlingo-3D

*Annoying* Gift Card Lock Box -Multi Colour No AMS

All Parts, 2 Plates, 0.16mm layer, 2 walls, 10% infill

Aloha! Printed great. had to use brim on the screw drivers as my bed adhesion was sub optimal. Came out fine printing the screwdrivers separately with brim. 

Mahalo and Mele Kalikimaka! *boosted*

NUKDDD

Flexi Mushroom Lamp 

for lamp kit, print by object 0.2mm layer, 2 walls, 15% infill

Really fun. One of my first prints with X1C using Bambu Basic PLA white and Bambu Matte PLA orange. 

Wouter

MINI Twist & Turn Fidget - Print in Place!

0.2mm layer, 2 walls, 15% infill

Fun print. Came out pretty cool. Printed using X1C with FlashForge PLA, Pink and Abyssal Red. 

hollowmaker

Articulated BiteCroc

Articulated Croc with Keychain Loop - 60% Original Size

came out great on carbon X1C with Bambu Basic green PLA. gave to coworker for her 4 year old son. 

sduppleganger

Baby Dragon Miniature

0.2mm layer, 2 walls, 10% infill

Printed out great on the first try on X1C. This was using AMOLEN PLA that is over 3 years old!  Details are not as fine as source model in first picture. Designer notes that in description, but reading comprehension is hard when just looking at pictures. Maybe post print larger than source photo or put highlighted text noting the fine detail model is the source for those not taking time to read description.

It’s still a nice print though to test that old filament.

Printzee

Mini Articulated Dragon (Magnet/Keychain)

mono color 0.2mm layer, 2 walls, 5% infill

This profile printed great on X1C with FlashForge PLA. Cute print. 

Pioterzero

Minecraft Ore - small Tealight LED lamp (white)

Printed with SunLu PLA plus black and Bambu Basic PLA white. had to scale to 105.1% in studio to fit tea lamp I had from Amazon. Will try to update with links. 

SpectreGadget

AMS Glass Separation LED RIser

R4 - Supports New AMS, wider channel for NEON LED strip.  0.2mm layer, 4 walls, 10% infill

Printed out in SunLu PETG Black, and had some first layer issues initially, but dialed things in and printed pieces separately to be safe. Came out great, and the difference with neon LEDs is amazing!

Idea Whomp

Cat - Halloween Ghost Tealight 3

Small Size - Optimized Profile - 0.2 (VLH)

Aloha! Came out pretty good. Easy print, no problems and about 1.5 hours to print. Mahalo!

Vini

Thermometer/Hygrometer Holder

Quick and easy print. Worked great! Bambu Black Matte PLA matches the hygrometer color perfectly!

The hygrometer is off by about +4-5 degrees. I'm in a tropical zone but it's a bit cooler than what's shown. lol